Architectural Color Changers

GRAPHITE 600 model AD3652 is a weatherproofed 575W color changer which has been designed for permanent exterior installation. The newly conceived outline provides for a compact and solid housing that blends discretely with any architectural environment. The standard optic group featured produces an electronically adjustable beam between 15° and 31°. In addition, the range of optical combinations gives the ability to narrow the beam aperture down to 8° or increase it up to a wide angle output of 65°. Beam shapers are also available for creative concepts. The subtractive color changing system that features variable transmission CYM dichroic filters can create a virtually endless variety of color hues and has been designed for excellent performance on smooth mixing between color changes. The special effects configuration includes an electronic zoom, a mechanical shutter for instant blackout, dimming and strobing facilities for dynamic lighting creations, remote lamp ON/OFF function and digital control of all tasks, including stand alone options and permanent color selection, with a maximum of six channels of DMX signal. The powerful and reliable performance of the fully equipped

GRAPHITE 600 is a breakthrough in the constantly evolving architectural stage.


LAMP
MSD 575 W, 43,000 lm, 6,000 K,
average rated life 3,000 hours
Ordering code LP0997
GX 9.5 base

STANDARDS
Extruded aluminum body, with adjustable universal mounting yoke.
Scratch resistant textured polyester gray finish, protected against UV deterioration and general corrosion
Front tempered glass shock resistant
Certified IP65 protection rating for the most severe weather conditions
Electrical class: I
Product in compliance with CEI EN 60598- 1 and CEI EN 60598-2-17

OPTICAL GROUP
� 127 mm ellipsoidal dichroic reflector coupled with an optical configuration that produces a beam angle combination which is electronically adjustable between 15° and 31°.
Optional lenses and beam shapers are available for alternative beam adjustments:
8°-14° narrow output filter - ordering code AD3656
40° output filter - ordering code AD3658
65° wide output filter - ordering code AD3660
15°x38° beam shaper for use with 8° lens only - ordering code AD3662

COLOR CHANGER SYSTEM
Variable transmission hatched dichroic filter for a CYM color changer system that is operated by high precision stepping motors. The subtractive color mixing system produces a linear 0 -100% virtually unlimited color creation.

GRAPHITE 600 MONOCHROME is also available upon request as a single color projector.

DYNAMIC EFFECTS
Electronic zoom
Variable speed instant black out effect
Linear mechanical dimmer function
8 FpS mechanical strobe system
Remote lamp on/off function

DIGITAL CONTROL
6 channels of standard DMX 512
Internal controller with a choice of eight pre-programmed color-change sequences, any of which can be easily selected from the user friendly on-board control panel.
Permanent color option.
Master/slave function for multi-unit synchronization.
Test mode for troubleshooting operation.
Dedicated IP65 controller for full remote programmable control - ordering code AD3664
User friendly dedicated programming software for personal computer - ordering code AD4118

COOLING
Convection cooling plus two internal axial fans keep the level of heat within the unit constant and help dissipation through the body.

Electronic temperature control to withstand persisting extreme weather conditions beyond 40°C assists lamp life and protect internal components from heat damage.

POWER SUPPLY
Standard power supply:
230 - 250V, 50-60 Hz, 3.5 Amp;
Custom power supply:
100 - 120V, 50-60 Hz, 7 Amp (with separate ballast set);
200 - 208V, 50-60 Hz, 4.2 Amp.

WEIGHT
43 kg

ADDITIONAL ACCESSORIES
4-LEAF BARNDOOR SET - ordering code AD3654
SAFETY HOOK - ordering code AD3666

DUE TO CONTINUOUS IMPROVEMENTS, SPECIFICATIONS MAY CHANGE WITHOUT PRIOR NOTICE.