The innovative IP65 Dimension range is complemented by the first
recessed fitting in the range, the new, compact colour changer NIAGARA
150.
NIAGARA 150 is primarily designed for flush mounting in
ground, and utilises a pressure diecast aluminium body, sealed with tempered
glass at ground level, with a nylon installation sleeve, and has an IP67 weather
protection rating. A 2000kg load bearing ability allows use in vehicled areas.
NIAGARA 150 produces, from a CDM-SA/T 150W 9000 hours lamp, a soft edge
51° circular beam, which can project straight up or be pre-adjusted through a
+/- 13?swivelling facility. The beam angle can be changed with an optional
fresnel lens and this can be combined with an expansion filter for further beam
variation.
NIAGARA 150 features eight colours and white, with inbuilt
speed or time pre-settable auto change. Multiple units can be synchronised in
this mode, or controlled via DMX.
Lamp
150 W, 12,900 lm, 4,200°
Metal halide lamp CDM-SA/T 150
Average rated life 9,000 hours
G 12 base
Standards
Pressure diecast aluminium body. Nylon installation sleeve for ground recessed
mounting, fitted with two holes for power supply tube entry. The area below the
sleeve must be open for drainage and with a gravel soakaway provided. Body
internally fitted with wiring.
Black polyester powder paint.
Front tempered glass shock resistant.
Certified IP67 weather protection
Electrical class: I
Load bearing: 2,000 Kg.
Optical Group
The optical system utilises an aluminium ellipsoidal reflector and produces a
soft edge beam of approximately 51°
Lamp swivelling angle +/- 13°
Additional filters are available for alternative beam adjustments.
COLOUR CHANGER SYSTEM- 1 rotating bi-directional wheel for 8 different colours
+ white.
BLACK-OUT- 100% black-out (on colour wheel) available via DMX control.
Colour Changing System
All functions can be accessed through 1 standard DMX 512 channel. Master/slave
option for multiple units synchronisation. Stand alone function and scenes speed
adjustment.
Power Supply
230 V, 50 Hz, 0.8 Amp
Thermal protection.
IP67 certified termination box for the entry of the DMX signal cables.
Cooling
An internal axial fan 80x80 mm keeps the level of heat within the unit
constant and helps dissipation through the metal body, which assists lamp life
and protects internal components and reflectors from heat damage.
Click here to view photometric data
for the Niagara 150.
