Dive into the water
with the LED AQUA HP fixtures that bring beautiful color and
color changing lighting to any type of underwater locations.
The LED AQUA
HP fixtures are a solution for outdoor and underwater installations.
Because of the advance LED technology, the LED AQUA HP does
not require filters or mechanical parts. There is no danger of overheating,
the fixtures do not need servicing and last for 100,000 hours.
Applications include (all outdoors/indoors use)- but not limited to- gardens,
parks, fountains, aquariums, swimming pools, and ponds.
LED AQUA HP model LU-UW-PC-DIA220V-24V-PI
is a high power water submersible LED lighting fixture, which is an ideal fixture
for both indoor and outdoor applications requiring full color mixing capabilities,
such as fountain, pool, theme park, exhibition, commercial and architectural
illuminations. For best heat dissipation, the LED AQUA HP is
recommended to be used underwater. LED AQUA HP has a protection
rating exceeding IP68, which is suitable for submersion up to 2 meter underwater.
A proprietary triple water proofing technology is used, making water intrusion
impossible.
The beam angle of
LED AQUA HP is 25° but other beam angles are also available.
The fixture can be controlled by any DMX controller. Each unit is individually
addressable and requires 3 DMX channels corresponding to red, green, and blue
respectively. Full color mixing is achieved by varying intensity of each primary
color. Up to 16.7 million colors can be produced.
LED AQUA HP uses the highest quality and high brightness LEDs
as light source with typical LED life up to 100,000 hours. Each unit consists
of 18 1.2W LEDs (6 red, 6 green, 6 blue). The LED AQUA HP circuitry
is engineered to optimize both led life and performance.
A proprietary power and data distribution system is used to minimize wiring.
The whole system includes a DMX controller, a switching power supply, a submersible
junction box, and LED AQUA HP fixtures. The junction box dramatically
reduces cable runs and provides power and data distribution.
LED AQUA HP has a stainless steel / cast aluminum housing with
adjustable yoke and base. The housing is designed to work in water treated with
bromine and chlorine.
Specifications:
Color Range:
16.7 million colors at 24 bit RGB additive
color mixing
Light Source:
18 1.2W high-powered LED
Beam Angle:
25° standard: 10, 45, 60 and 90 degrees are also available with higher lead
time.
Signal transferring
format: standard DMX protocol (RS485 terminal)
Control system:
“DMX console + power switch + distributor” or “SRC-AI-100 Address Writer + power
switch + distributor.
DMX address:
Generated by SRC-AI-100 Address Writer.
Housing:
stainless steel
Connector:
3-pin signal connector
Dimensions:
L255xW180xH245.4mm
Operating
Voltage: 24V DC
Power Consumption:
35w
Operating
Temperature: -20°C - 55°C
Submersion
Depth: 400mm – 2000mm
Sustainable
Pressure: 0.0533 T/mm
Protection
Rating: IP68 http://www.articulight.com/acc/IPRatings.html
Color
Effects:
Fixed Color:
single static color display
Color Wash:
color change
Cross Change:
two color cycles
Random Change:
colors change in random order
Fixed Color
Strobe: a rapid strong flash of light of a single color
Variable Color
Strobe: a sequence of color appears in a series of strong flashes of
light
Model:
LA-DIA-JP- 24 V
for LED AQUA HP
COMBO OF SWITCH POWER SUPPLY CASE PLUS
DISTRIBUTOR/JUNCTION BOX; OUTPUT VOLTAGE: 24 V DC; INPUT VOLTAGE: 120 V or 220
V; RUNS MAXIMUM 6 LED AQUA HP
Dimensions: 37 x 30 x 12 cm
Weight: 10 Kg
DUE TO CONTINUOUS IMPROVEMENTS,
SPECIFICATIONS MAY CHANGE WITHOUT PRIOR NOTICE.
