|
MARATHON 180is a new, energy-saving street light product
that utilizes 180high-power LEDs as a light source. It can be
directly connected with a 100-240V AC power supply. In the LED
color spectrum, there is no ultraviolet light, no infrared rays,
no heat, and no radiation produced. As a result, MARATHON 180 is
a conventional ”green” lighting source. The lamp casing is made
of aluminum-alloy through die-casting. The lamp cover material
uses high quality toughened glass, which is highly lucent, dust
proof and waterproof., The whole set uses stainless steel
fasteners. The surface of the product is covered with
fluorocarbon powder that is sprayed on in electrostatic spraying
manner, resulting in a good self-cleaning property. The product
is safe, reliable, and has low energy-consumption and a long
life span. It is especially suitable for use in public places
such as open squares, streets and roads just to name a few.
MARATHON180 with Light & Time control (AST) is an additional
function. LED street light can turn on and turn off
automatically according to the light sensor, when the
illuminance gets lower than 13 LUX, the light comes
on; otherwise, it keeps it off. When the illuminance gets higher
than 50 LUX, the light goes off. It needs 5 minutes in the
process of on and off switching. In the early 6 hours working
time, the light shines at its maximum power, and in the late 4
hours, the light shines at its half power.
The above function just can be set according
to the customers requests in the factory, and customers cannot
set it themselves.
|
Comparing Data |
MARATHON 180W LED Street Light |
400W High-pressure Sodium (HPS)Street Light |
|
Total Luminous Flux（lm） |
11,058 lm |
14,400 lm |
|
Average Illumination
（lux） |
21 lux |
21~25 lux |
|
12m (40 ft)High |
12m (40 ft)High |
|
Total Power Consumption (W) |
220 W |
600 W |
MARATHON 180W LED Street light comparing with CIE Standards Data
|
Expressway and traffic arterial roadway |
CIE Standard |
180w Street light
(High 12 meter (40 ft)) |
|
Average Illumination (lux) |
20/30 |
>21 |
|
Uniformity |
0.4 |
0.48 |
|
Technical
Specifications
|
|
MODEL |
STR2022-000ABC
|
STR2022-100ABC
STR2022-101ABC
|
STR2022-200ABC
STR2022-201ABC
|
|
Type |
MARATHON180(Head
Unit) |
MARATHON 180 (Single Head) |
MARATHON 180 (Double Head) |
|
Light source |
180
1W high power LED 180 1W high
power LED |
180
1W high power LEDx2 |
|
Color temperature |
2000K±200K; 6500K±500K |
|
Luminous flux |
SEE
ABOVE |
SEE
ABOVE |
|
Average Illumination |
SEE
ABOVE |
|
Area of Illumination |
SEE
ABOVE |
|
Input voltage |
100-240V AC,50/60Hz
|
|
LED
operating current |
24V
DC |
|
Total LED Power |
200W |
200Wx2 |
|
Installation tube diameter |
Ř60mm (Max.) |
NANA |
|
Working Environment |
-30°C-+40°C |
|
Note |
|
STR2022-101ABC
STR2022-201ABC
The Auto Switching
Technology(AST) sensor is located on the adjoining
bracket
between the pole coupler and the LED fixture.
AST works by Auto Switching “turning on” the High Power
LED Street Light when
the luminance of sunlight is lower than 13 LUX and off
again when a LUX factor
greater than 13 is sensed.
AST=Automatic Switching Technology
|
Dimensions of Framework
STR2022-000ABC
STR2022-100ABC
STR2022-101ABC
STR2022-200ABC
STR2022-201ABC
DUE TO CONTINUOUS IMPROVEMENTS, SPECIFICATIONS MAY CHANGE
WITHOUT PRIOR NOTICE. |
